Easy use: Guide for the use of sodium hypochlorite generator
2025.03.14
Packaged sodium hypochlorite generators are widely used in water treatment, disinfection and cleaning. It produces sodium hypochlorite by electrolysis of salt water (sodium chloride solution), an effective disinfectant that kills bacteria, viruses, and other pathogens. This article will provide you with a detailed use guide to help you easily package the sodium hypochlorite generator.
Equipment preparation
Before using the packaged sodium hypochlorite generator, you need to ensure the integrity and functioning. Check the following aspects:
1. Equipment appearance: ensure that the generator is not obviously damaged or corroded.
2. Power connection: confirm that the power cord is firmly connected and the plug is not damaged.
3. Water source preparation: prepare clean tap water and salt to ensure that the water quality meets the equipment requirements.
equipment installation
1. Select the installation location: select a well-ventilated and dry place to install the equipment to avoid direct sunlight and humid environment.
2. Fixed equipment: According to the equipment instructions, fix the generator to the wall or bench to ensure stability.
3. Connecting the water pipe: connect the water pipe to the water inlet of the generator to ensure that the connection is tight without water leakage.
operating steps
1. Add salt: according to the requirements of the equipment instructions, add the appropriate amount of salt to the salt tank of the generator. Generally, the salt concentration should be kept between 3% and 5%.
2. Water injection: inject clean water into the water tank of the generator, and the water level should reach the marking line of the equipment.
3. Start the equipment: turn on the power switch, and the equipment will start running automatically. Depending on the model of the equipment, you may need to set the running time and the generation concentration.
4. Monitor the operation status: During the operation of the equipment, check the indicator light and display screen regularly to ensure the normal operation of the equipment. If there is a fault indication, stop the equipment and find the cause.
Notes for use
1. Safety protection: During the operation, it is recommended to wear gloves and goggles to avoid direct contact with the sodium hypochlorite solution to prevent irritation of the skin and eyes.
2. Regular maintenance: regularly check the electrodes and water tank of the equipment, clean dirt and sediment to ensure the efficient operation of the equipment.
3. Storage attention: Sodium hypochlorite solution should be stored in a cool, dry place to avoid direct sunlight and high - temperature environments and extend its validity period.
4. Waste liquid treatment: the sodium hypochlorite solution should be treated in accordance with the local environmental protection regulations to avoid environmental pollution.
Common problems and solutions
1. Equipment does not start: check whether the power connection is normal, ensure that the plug is tight and the power switch is on.
2. For insufficient concentration, check whether the amount of salt is sufficient, whether the water quality meets the requirements, and whether the electrodes need to be cleaned.
3. Smell of the equipment: it may be due to water quality problems or scale inside the equipment. It is recommended to stop use and clean immediately.
Copyright @ 2022, NetEase Zhuyou(and its affiliates as applicable). All Rights Reserved.